You obviously need to have the credentials to perform IAM operations (either you have the access key and secret key of a such a user, or you can SSH to an EC2 instance whose role allow that, etc.) Also, this article is about virtual MFA devices (typically using Google Authenticator); for hardware devices, you might need to change a few things.

If you are running the commands from an EC2 instance with an associated role allowing IAM access, don’t include the `–profile MYPROFILE` part of the commands because you don’t need an access key and a secret key. Otherwise, you need an access key and a secret key and I strongly recommend you segregate them in “profiles”, and use the `–profile MYPROFILE` argument on the command line every single time.

The reason to keep this segregation is so that you don’t mess up with an AWS account while thinking you’re accessing another AWS account; by forcing yourself to type `–profile MYPROFILE` every time, you are almost guaranteed that this will never happen. For the same reason, I don’t recommend setting the `AWS_PROFILE` environment variable, as sooner or later you will mess up with an AWS account thinking you are targeting another AWS account.

Assuming you have the necessary permissions, follow along.

If the user you are targeting (which may be yourself) already has an MFA device associated with it, you need to de-associate it first because a user can only be associated with one MFA device at a time:

$ aws --profile MYPROFILE iam deactivate-mfa-device --user-name USERNAME --serial-number arn:aws:iam::123456789012:mfa/DEVICENAME
$ aws --profile MYPROFILE iam delete-virtual-mfa-device --serial-number arn:aws:iam::123456789012:mfa/DEVICENAME

It is good housekeeping to delete the MFA device and to keep one MFA device per user (don’t re-use MFA devices across users).

Now create a virtual MFA device:

$ aws --profile MYPROFILE iam create-virtual-mfa-device --virtual-mfa-device-name DEVICENAME --outfile my-qr-code.png --bootstrap-method QRCodePNG

It is good practice to use the USERNAME as the DEVICENAME. This way, it is a lot easier to identify that this virtual MFA device is to be associated with that user. Keep the `my-qr-code.png` file safe, it is a secret. Now open the QR code with your favourite image viewer, install Google Authenticator on your mobile phone and scan the QR code. Google Authenticator will start churning out time-based one-time passwords (TOTPs) every 30 seconds.

Finally, associate the newly created virtual MFA device with the user:

$ aws --profile MYPROFILE iam enable-mfa-device --user-name USERNAME --serial-number arn:aws:iam::123456789012:mfa/DEVICENAME --authentication-code1 CODE1 --authentication-code2 CODE2

Replace CODE1 by the TOTP Google Authenticator is currently showing you. Then wait for the next code to show up, and this is your CODE2. Press enter to send the command before the 2nd code disappears otherwise the association will fail.

If you ever lose your phone for whatever reason, you can use the QR code to restore your association using the `aws iam resync-mfa-device` command without having to delete the original MFA device and re-create a new one.

I work as a freelancer, so if you don’t want to do that kind of things yourself or don’t have the time, just drop me a line to hire me.